DESIGN AND IMPLEMENTATION OF A COMPUTERIZED COST ACCOUNTING SYSTEM

ATTENTION:

BEFORE YOU READ THE PROJECT WORK, PLEASE READ THE INFORMATION BELOW. THANK YOU!

TO GET THE FULL PROJECT FOR THE TOPIC BELOW PLEASE CALL:

08168759420, 08068231953

TO GET MORE PROJECT TOPICS IN YOUR DEPARTMENT, PLEASE VISIT:

www.easyprojectmaterials.com

www.easyprojectsolutions.com

www.worldofnolimit.com

DESIGN AND IMPLEMENTATION OF A COMPUTERIZED COST ACCOUNTING SYSTEM

ABSTRACT

This research project tries to review the cost accounting system of KRISTAL SILENT, which of course is a manual processing system by a systematic analysis and recording of vertical transactions in respect of labour, material and expenses, the collation and interpretation of these need to disclose costs of particular products or services and the application of this vertical information for the purpose of efficient running of the business.

The accompanying software, computerized cost accounting system is a package developed with the aim of computerizing all cost activities for the said company. The program is in modules, which describes project activities, and information that is related to it. It provides the user the ability to federate analysis of project execution cost on monthly, quarterly and on yearly basis with its respective business forecast.

ORGANIZATION OF WORK

This work is divided into six chapters.

Chapter one has to do with introducing the project topic, statement of the problem, purpose of study, aims and objectives, scope, limitations and definition of terms.

Chapter two is the review of related literature

Chapter three has to do with finding out how the current system works and what the new system must do.

Chapter four: This phase of the system project spelt out how to build the new system, including the input/output design, file design, the procedure as well as the system requirements.

Chapter five is documentation

Chapter six is about recommendation and conclusion.

TABLE OF CONTENTS

Title Page

Abstract

Organization of Work

Table of contents

CHAPTER ONE

1.0 Introduction

1.1 Background of study

1.2 Statement of problem

1.3 Purpose of study

1.4 Aims and Objectives

1.5 Scope

1.6 Limitations and Constraints

1.7 Definition of terms

CHAPTER TWO

2.0 Literature Review

CHAPTER THREE

3.0 Introduction

3.1 Description and Analysis of the existing system

3.2 Fact finding methods used

3.3 Objectives of the existing system

3.4 Input, process and output analysis

3.5 Problems of the existing system

3.6 Justification for the new system

CHAPTER FOUR

4.0 Design of the new system

4.1 Output specifications and design

4.2 Input specifications and design

4.3 File design

4.4 Procedure chart

4.5 System flowchart

4.6 System requirement

CHAPTER FIVE

5.0 Implementation of the new system

5.1 Program design

5.3 Program flow charts

5.4 Pseudocodes

5.5 Source program

5.6 Test run

CHAPTER SIX

6.0 Documentation

6.1 Communication with the language

6.2 Loading the language

6.3 Procedure

6.4 Loading the program

CHAPTER SEVEN

Recommendation and Conclusion

Bibliography

CHAPTER ONE

INTRODUCTION

1.1 BACKGROUND OF STUDY

The nature and development of an economy establishes the basic requirements for accounting. The emphasis to cost accounting for instance has been directed towards meeting the practical needs of manufacturing industries. The rapid growth and expansion of service industries now demand that accountants direct their attention to solving a new set of problems that are in many industries not related to manufacturing. The accountant is faced with the problem of adapting and combining the present accounting techniques into modern and flexible systems for the service industries.

The task of accounting for manufacturing costs and expenses obviously requires a further expansion of the preceding system. The form that this expansion takes depends on many factors such as the kinds of control, which is desired to exercise over manufacturing activities, the nature of the manufacturing activities themselves, and the relationship, which is to be mentioned between financial and cost records.

From the above, it is clear that even though the presentation of cost accounts, for various types of business may vary, i.e is normal to follow the following procedures:

(a) All expenditure is analysed and classified into direct and costs. The direct costs can be attributed to a particular job process on operation and they are transferred to it.

(b) The indirect costs are placed to the relevant account. If they can be placed to one particular account such as factory overhead becomes allocation of overhead. But if they make to be divided between different overhead accounts is called apportionment of overhead.

1.2 STATEMENT OF PROBLEM

In drawing up a scheme of costing, one of the first steps much be decided upon the cost centers, which are to be used. Following this, these overheads, which can be allotted, can be transferred to the relevant sections. The others must be apportioned between the relevant departments. The methods of apportionment will vary but care is needed to select the finest and concernment method in the circumstances.

In this project work, we are narrowing down to the cost accounting system as has been practiced by KRISTAL SILENT, which of course is done manually.

The land of cost accounting in the organization is the historical cost accounting system. Hence the system to be developed will take care of some of those anomalies that pose constraints to the system.

Therefore the research goes on to ask such question as what are the likely benefits to be gained from this project study?

1.3 PURPOSE OF STUDY

The purpose of this study is trying to figure out the difficulties and irregularities encountered by KRISTAL SILENT in its existing system. The research amongst other things introduces standard that show the cost of production of every unit, job, and process operation or department by close analysis of expenditure. To indicate to management any inefficiencies and waste which are thereby revealed. To serve as a guide to price fixing. To provide comparative statement of costs in which the cost of the current period are compared with the costs of a previous period; or more helpfully, with the budgeted costs; and financially to take action in respect of significant variations of the costs from the budgeted figures and thus to control cost.

1.4 AIMS AND OBJECTIVES

The aims and objectives of this project is to redesign and computerized the manual system of cost accounting as being practiced in KRISTAL SILENT. The computerized system amongst other things.

§ Ease the burden of calculating and recalculating of figures to get at the exact output.

§ Automatic report generation and report of the financial status of the firm.

§ Automatic posting of accounts from the individual ledgers to the general ledger

§ Speed of operation will be increased tremendously and volume of output enhanced too.

1.5 SCOPE

This project has been narrowed down to the financial humations of particular project undertaken by the said company. It tells us about the nature of project. Its contract value, the equipment and materials procedures in the execution of the project the labour cost and wages to the project. And finally, it furnishes the management with the information of how much was expended while carrying out the project and how much is remaining, that will serve as profit.

AFFILIATE LINKS:

www.nairaproject.com.ng

www.nairaprojects.com.ng

www.nairaproject.net

www.nairaprojects.net

easyprojectmaterial.net
easyprojectsmaterial.net
easyprojectsmaterials.net
easyprojectmaterial.net.ng
easyprojectmaterials.net.ng
easyprojectsmaterials.net.ng
easyprojectsmaterial.net.ng
worldofnolimits.com
worldofnolimit.net
worldofnolimits.net
worldofnolimit.com.ng
worldofnolimits.com.ng
worldofnolimit.net.ng
worldofnolimits.net.ng

DESIGN AND IMPLEMENTATION OF A COMPUTER BASED LIBRARY INDEXING SYSTEMv

ATTENTION: BEFORE YOU READ THE PROJECT WORK, PLEASE READ THE INFORMATION BELOW. THANK YOU! TO GET THE FULL PROJECT FOR THE TOPIC BELOW PLEASE CALL: 08168759420, 08068231953 TO GET MORE PROJECT TOPICS IN YOUR DEPARTMENT, PLEASE VISIT: www.easyprojectmaterials.com www.easyprojectsolutions.com www.worldofnolimit.com DESIGN AND IMPLEMENTATION OF A COMPUTER BASED LIBRARY INDEXING SYSTEM ABSTRACT A library system is an information system that serves a population of users. The term “Information system” is normally used in situations where an organization is considered as a whole with respect to its information requirement and information utilization. In a library environment, “indexing has remained the means of text and document identification. Comprehensively, indexing is a term, which is applied to many compilation and arrangement of text and documents which is either in alphabetical order, chronological or numerical order. Igbinedion Un

EASY PROJECT MATERIALS (CALL: 08068231953, 08168759420)

Search This Blog

DESIGN AND IMPLEMENTATION OF A COMPUTERIZED COST ACCOUNTING SYSTEM

Comments

Post a Comment

Popular posts from this blog

MASTERS ACTUARIAL SCIENCE PROJECT TOPICS AND MATERIALS

MASTERS ACTUARIAL SCIENCE PROJECT TOPICS AND MATERIALS

DESIGN AND IMPLEMENTATION OF A COMPUTER BASED LIBRARY INDEXING SYSTEMv